Amigurumi Cute Bunny Free Crochet Pattern

Welcome to our website where you can find the most beautiful and highest quality samples of Amigurumi patterns. All the amigurumi patterns you can’t find are available on our website. Every day we continue to share new amigurumi patterns for you. Stay tuned to reach these amigurumi patterns before anyone else

Abbreviations:
Sc – single crochet

inc – increase,

Dec – decrease

Hdc – half crochet

CH – chain

Materials:

• Yarn:

– Alize Lanagold 800.100 grams / 800 meters. Color 064

Lactic

You can take

any

wool blend or

wool, that

texture and color,

which you

soul.

– Alize Kid Moheir. 50 grams / 500 meters.

Color 62 Milky

• Disks and cotter pins:

1. For the head – a 22mm disk, a cotter pin 2.5: 20.

2. For a neck a disk of 18 mm.

3. For arms and legs – disc 22 mm and forelock 2.0: 20

4. For the inner side of the disc -18 mm.

Total should be 10 discs and 5 cotter pins.

• Eyes:

– depending on the toy, on its size, use no larger than 3 mm.

• Hook:

– I used 1.5 for wool. You need to consider the thickness of the thread

yarn and pick up in accordance with the directions and recommendations.

• Toning:

• – I use oil pastels. Three shades for a different look and color

yarn. And brush, rigid structure (synthetics or bristles), for

feathering.

• Instruments:

– needle for sewing parts and tighteners, sewing thread, for embroidery eyebrows

and nose.

– copper wire for reinforcement. – slicker and Velcro.

For fleece.

1.6 sc into magic ring

2.6 İNC (12)

3. (1sc + İNC) * 6 (18)

4-5. Knit 2 rows (18)

6. (2sc + İNC) * 6 (24)

7-8. Knit 2 rows (24)

9. (3sc + İNC) * 6 (30)

10-11. Knit 2 rows (30)

12. (4sc + İNC) * 6 (36)

13-14. Knit 2 rows (36)

15. (5sc + İNC) * 6 (42)

16. (6sc + İNC) * 6 (48)

17-22. Knit 6 rows.

• Installing a cotter pin with a disk

located on the marker thread

between 15-16 near.

23. (6 sc + DEC) * 6 (42)

24. Knit 1 row

25. (5 sc + DEC) * 6 (36)

26. (4sc + DEC) * 6 (30)

27. (3sc + DEC) * 6 (24)

28. Knit 1 row

• Run a fleece using

tools and fill your head tight filler.

29. (2sc + DEC) * 6 (18)

30. (1sc + DEC) * 6 (12)

31.6 DEC to the end

Close knitting with a needle.

Run fleece.

 I leave my head not closed until I fix my eyes and sew

the ears.

Head:

1. Dial 15 CH into the second

knit from the hook:

8 HDC, 5 sc, (in one loop, it’s the beginning of the chain) 1sc, 2 CH, 1 sc, 5 sc, 8 HDC, CH and rotate knitting.

2.14 HDC, (in 2 CH knit – 1 HDC, CH, 1 HDC), 14 HDC, CH and rotate knitting.

3.10 HDC, 5 sc, (knit in one loop – 1sc, 2 CH close in

ring, picking up the edge of the chain of the previous column, 1 sc), 5 sc,

10 HDC

Further knitting goes on the base of the ear.

4. 3 HDC in one loop, 5 HDC, 3 HDC in one loop,

Further we continue throughout the eye, without turning the knitting.

15 sc, (in one loop, where there was a ring of air loops to knit – 1sc, CH, 1 sc), 18 sc.

Ears:

Close knitting, leaving thread for sewing.

1. It is necessary to find the center of the head. For this, a long needle, from

cotter pin, pull the needle up. Find row 13 and set the first

needles for the eyes. The distance between the needles is 12-13 columns.

 2. The width of the tightening step is 3 sc diagonally and shift down one row.

Tucks:

3. Fasten the thread at the base of the unit

cotter pin and put in place set needles.

First right, then left side.

You can vice versa, as convenient.

These were diagonal buckles.

4. Perform tightening between the eyes,

bringing the needle to the bottom where it is installed

cotter pin, and into the corners of the eyes. Pulling

between each other, passing puncture points 2 times.

1. In the center, the beginning of knitting, where the Amigurumi Ring began, enter

needle with thread and withdraw parallel to the cotter pin, retreating 5-6 rows down. AND

bring back to the center of the beginning of knitting. After passing this stage 2 times.

2. Withdraw the needle, diagonally upwards, in 2-3 rows. I form English

letter V. Repeat step 2 times.

Embroidery:

1. Protect the area of ​​the embroidery of the nose gently pink.

2. “Brown” the cheeks with a brush.

3. The color of ocher or brown, protonate the eye site.

Toning:

4. Apply color to the inside of the ear. Top use pink / red, add brown / ocher to the bottom. Performing stretch color.

5. Walk the slicker again, all over the head, without affecting the place embroidery.

6. Chop ears and try on to the head.

7. Optionally, you can embroider eyebrows. To complement the image. I AM this stage is not performed.

8. Set the eyes comfortable for You way.

I put my eyes on the glue. You can install in advance eyes on a secure mount or sewn on a leg.

1.6 sc into magic ring

2.6 İNC (12)

3-6. Knit 4 rows (12)

7-8. 6 sc, 6 sl-st (12)

9.3 sc, DEC, 4sc, İNC, 2sc

10.3 sc, DEC, 4 sc, İNC, 1sc, İNC.

11.2 sc, DEC, 4 sc, İNC, 4 sc.

12.2 sc, DEC, 4 sc, İNC, 2 sc, İNC.

13.2 sc, DEC, 5 sc. İNC, 4 sc.

14.2sc, DEC, 4sc, İNC, 1sc, İNC, 3 sc

15.9sc, İNC, 5 sc.

16. 2 sc, DEC, 4 sc, İNC, 2 sc, İNC, 4 sc

17. 2 sc, DEC, 4 sc, İNC, 4 sc, İNC, 3 sc.

18.2 sc, DEC, 7 sc, İNC, 6 sc.

19. 2 sc, DEC, 5 sc, İNC, 1 sc, İNC, 6 sc.

20. 2sc, DEC, 8sc, İNC, 6 sc.

21. 2 sc, DEC, 7 sc, İNC, 2 sc, İNC, 4 sc. (20)

22-33. Knit 12 rows. (20)

After these rows it is necessary to install a cotter pin with a disk.

34. (2 sc + DEC) * 5 (15)

35. (1 sc + DEC) * 5 (10)

36. Knit 1 row

37.5 DEC to the end. Tighten the hole with a needle.

Arms:

1. Before installing the cotter pin, it is necessary to pile, without removing

marker thread.

2. Fill the hand with filler, not very tight.

3. Insert the wire by wrapping the edges in front of this adhesive plaster.

4. For the right hand (relative to the toy) – retreat 2 rows down and 1 sc to the right of the marker thread.

5. Install the cotter pin with the disk. After installation, the hand is no longer stuffed.

It should enter tightly across the width of the knitted fabric.

• This is the only way to avoid the biceps on the arms of your toys.

Cotter pin installation:

6. For the left hand (relative to the toy) – retreat 2 rows down and 8 sc to the left of marker thread.

7. Delete marker thread and close the knitting.

8. Comb the part. evenly.

 Wire needed for fitting parts and then you can give shape hands.

 Without wire, hand will also hold form. Reinforce not required.

 For a more accurate image, left

leg toys needed knit in the mirror display.

1.6 sc into magic ring

2.6 İNC (12)

3.6 sc, (1sc + İNC) * 3 (15)

4.6 sc, (İNC + 2 sc) * 3 (18)

5.6 sc, (3 sc + İNC) * 3 (21)

6-8. Knit 3 rows. (21)

9.6 sc, (3 sc + DEC) * 3 (18)

10.6 sc, (2 sc + DEC) * 3 (15)

11.6sc, (1sc + DEC) * 3 (12)

12-15. Knit 4 rows.

We knit the heel 16 row.

 7 sc, CH and rotate knitting,

 6 sc, CH and rotate knitting,

 DEC, 2 sc, DEC, CH and to turn,

 2DEC, CH and rotate

Legs:

It was all one row, we tied heel.

17.2 sc (heel), 2 sc (side), 5 sc (in front of the foot).

18.1 sc, 2 sc (side), 2 (top heels), 7 sc to the end of the row.

19. Knit one row (12)

20. 1sc, 6 HDC, 5 sc. (12).

21-23. Knit 3 rows.

24. 5 sc, İNC, 5 sc, inc. (fourteen)

25. 11 sc, 2 İNC, 1 sc (16)

26-27. Knit 2 rows.

28. 2İNC, 14 sc (18)

29-30. Knit 2 rows.

31.1 sc, İNC, 8 sc, İNC, 4 sc, İNC,

1 sc, İNC (22)

32-33. Knit 2 rows.

34. 2 sc, İNC, 15 sc, İNC, 3 sc (24)

35-38. Knit 4 rows.

39. (2sc + DEC) * 6 (18)

40. (1sc + DEC) * 6 (12)

41. 6 DEC, tighten the hole with a needle.

1.Before installing the cotter pin, you need to do a fleece without removing the marker thread.

2. Fill the leg filler, not much tight.

3. Insert the wire, wrapping the edges before this with a band-aid.

4. For the right leg (relatively toys) install a disk with cotter pin – 2 rows down and 4 sc equally.

5. For the left leg (relatively toys) install the drive with cotter pin – 2 rows down and 7-8 sc equally.

 The rabbit’s legs are voluminous in top of it, so to speak “hip”.

 Therefore, after installation cotter pin, wire should go to disk and need to add filler.

 The forelock must enter clearly the width of the knitted fabric.

Cotter pin installation:

6. Delete marker thread.

7. Comb the detail. evenly.

8. Run closing the legs like indicated above.

1.6c into magic ring

2.6 İNC (12)

3. (1sc + İNC) * 6 (18)

4. (2sc + İNC) * 6 (24)

5. (3sc + İnc) * 6 (30)

6-9. Knit 4 rows.

Fix the head to the center of the spacecraft.

The disk has chosen 18-15mm, no more. If

your body is voluminous, pick up a disk

3-5 mm less than the head disc.

10. (4sc + İNC) * 6 (36)

11-14. Knit 4 rows

In row 12, put an additional marker

for installing hands.

15. (5 sc + İNC) * 6 (42)

16-21. Knit 6 rows.

Set hands between 11-12 rows.

Body:

 From the marker thread I

stepped back by 8-9sc in the sides. So you can find a landmark

for installing hands.

22. (6 sc + İNC) * 6 (48)

23. (7 sc + İNC) * 6 (54)

24. 20 sc, (1 sc + İNC) * 7, 20 sc (61)

25-36. Knit 14 rows.

37.20 sc, (1 sc + DEC) * 7.20 sc (54)

38. Knit 1 row.

39. (7 sc + DEC) * 6 (48)

40. Knit 1 row

41. (6 sc + DEC) * 6 (42)

After this series I install

legs, I shift them a little in turn, not clearly on the sides. The offset is literally 2 sc.

42. Knit 1 row

43. (5 sc + DEC) * 6 (36)

44. Knit 1 row.

45. (4 sc + DEC) * 6 (30)

46. ​​knit 1 row

47. (3 sc + DEC) * 6 (24)

48. (2 sc + DEC) * 6 (18)

49. (1 sc + DEC) * 6 (12)

50. 6 DEC to the end.

 For those who do not use cotter pins, the body can be knitted completely and stuffed.

1. Installation of hands.

Set hands after 11-12 rows.

The marker thread should go in the center of the back, adjust before

installation. I retreated from the marker thread by 8-9sc in the sides. So you can find

landmark for setting hands.

Install the handles, and check their symmetry.

Only then tighten the cotter pins with a 15 mm diameter disc.

2. Tie the body to the 44th row.

3. Install the legs.

Installation of legs goes between 39-40 nearby. It is possible and higher, the main thing is that

the toy was sitting.

Try it on and see how you feel comfortable.

Assembly:

Adjust the sides so that the legs are symmetrical.

You can even shift them a little bit,

so the support will be more stable.

4. Check the toy in a sitting position.

Only then tighten the cotter pins.

5. Fill the body tightly and close the knitting.

6. Run a full-body comb.

7. Tie the ponytail:

1.7CH, second off hook

knit:

2 sc, 3 HDC, (in one loop

knit – HDC, 2 CH in

ring, HDC), 3 HDC, 2 sc.

2. 4 HDC, 2 sc, (knit in the ring of the previous row – 1sc, CH, 1 sc), 2 sc, 4 HDC.

Close knitting.

9. Comb the part of the tail and sew it to the body.

10. Comb the place of sewing with Velcro.

11. Sew the eyelet with the remaining thread. Sew to the head, making the distance between

ears in 1-2 sc.

12. The ears should be slightly deployed on the outside.

13. Optionally, you can embroider a division of the fingers on the handles and legs with sewing thread.

The bends of the arms and legs can be protonated with pastel, as on the muzzle.